Cross Section Perpendicular To Y Axis

5 min read

Cross Sections Perpendicular to the Y Axis: Formula, Steps, and Worked Examples

A cross section perpendicular to the y axis is a slice taken straight through a solid so that the cut is horizontal — parallel to the xz-plane — and every slice has a thickness of dy. This idea is one of the most powerful tools in integral calculus for finding the volume of irregular solids, and mastering it means you can handle any "volume with known cross sections" problem on an exam or in engineering practice Most people skip this — try not to..

The Core Idea in Plain Language

Imagine a loaf of bread. On top of that, if you cut it horizontally, each slice is a flat shape — a circle, a square, a triangle — and each slice is very thin. Practically speaking, if you know the area of every slice and you stack all the slices back together, you recover the whole loaf. Calculus simply gives us a precise way to add up infinitely many infinitely thin slices Worth knowing..

When the slices are perpendicular to the y axis, the stacking direction is vertical, so the thickness of each slice is dy, and the integral runs over y-values:

V = ∫ from c to d of A(y) dy

Here, A(y) is the area of the cross section at height y, and c and d are the lowest and highest y-values of the base region.

Compare this with slices perpendicular to the x axis, where the thickness is dx and you integrate with respect to x. The geometry is identical; only the variable of integration changes.

Step-by-Step Method

Follow this sequence every time, and the problem becomes mechanical Most people skip this — try not to..

  1. Sketch the base region. Draw the region in the xy-plane that the solid "sits" on. Label the bounding curves.
  2. Draw a typical horizontal slice. At some height y, draw a thin horizontal line segment across the base. This segment is the diameter, side, or base of your cross-sectional shape.
  3. Find the slice length L(y). Express the horizontal distance across the region as a function of y. This almost always means solving the boundary equations for x in terms of y.
  4. Write the area function A(y). Use the geometry of the cross section (square, semicircle, triangle, etc.) and substitute L(y) into the appropriate area formula.
  5. Identify the limits c and d. These are the minimum and maximum y-values in the base region — not the x-values.
  6. Integrate and evaluate. Compute ∫ₐᵇ A(y) dy and simplify.

Area Formulas You Must Know

The slice length L(y) plays different roles depending on the shape. Memorize these:

Cross-sectional shape Area in terms of slice length L
Square A = L²
Rectangle (height = k·L) A = k·L²
Circle with diameter L A = π(L/2)² = (π/4)L²
Semicircle with diameter L A = (π/8)L²
Equilateral triangle with side L A = (√3/4)L²
Isosceles right triangle, hypotenuse L A = L²/4
Isosceles right triangle, leg L A = L²/2

Watch the distinction between diameter and radius. If the problem says the diameter of a circular slice lies in the base, then r = L/2. If the radius lies in the base, then r = L. This single detail is the most common source of errors It's one of those things that adds up..

Worked Example 1: Square Cross Sections

The base of a solid is the region bounded by y = x² and y = 4. Cross sections perpendicular to the y axis are squares. Find the volume.

Solve for x: from y = x² we get x = ±√y Easy to understand, harder to ignore..

Slice length: L(y) = √y − (−√y) = 2√y Simple, but easy to overlook..

Area: A(y) = (2√y)² = 4y.

Limits: y runs from 0 to 4 Turns out it matters..

Volume:

V = ∫₀⁴ 4y dy = 2y² |₀⁴ = 2(16) − 0 = 32 cubic units

Worked Example 2: Semicircular Cross Sections

Use the same base, but now the cross sections are semicircles whose diameters lie in the base Which is the point..

Diameter: d = 2√y, so radius r = √y Worth keeping that in mind..

Area: A(y) = ½πr² = ½π(y) = (π/2)y It's one of those things that adds up..

Volume:

V = ∫

₀⁴ (π/2)y dy = (π/4)y² |₀⁴ = (π/4)(16) = 4π cubic units

This is smaller than the square-cross-section volume, as expected: a semicircle of diameter d has area (π/8)d², while a square of side d has area d², and π/8 < 1 Simple, but easy to overlook..

Common Pitfalls to Avoid

  • Integrating with respect to the wrong variable. If the slices are perpendicular to the y-axis, the integral must be in y.
  • Using x-limits as y-limits. The limits c and d are the smallest and largest y-values in the base.
  • Confusing diameter with radius. For circular and semicircular slices, halve the slice length before squaring.
  • Forgetting to solve for x in terms of y. The slice length L(y) must be expressed entirely in terms of y before integrating.
  • Mixing up the role of L. For an isosceles right triangle, whether L is the leg or the hypotenuse changes the area formula by a factor of 2.

A Final

A Final Check

Before you leave a volume-by-slicing problem, run this quick audit:

  1. Are the slices perpendicular to the y-axis? Then every expression — L(y), A(y), and the differential — must be in y.
  2. Did you solve the boundary curves for x in terms of y?
  3. Is L(y) the full distance between the left and right boundaries at height y?
  4. Did you use c and d as y-values, not x-values?
  5. For circles and semicircles, did you halve L before squaring?
  6. Does your final answer have cubic units?

If all six pass, the integral is almost certainly set up correctly.

Conclusion

Volumes by cross sections perpendicular to the y-axis are not a new integration technique; they are a change of perspective. Plus, instead of stacking thin vertical rectangles, you stack thin horizontal slices. Plus, the base tells you how long each slice is, the cross-section shape tells you how to turn that length into an area, and the integral adds those areas from the bottom of the region to the top. Here's the thing — once you can write L(y) confidently, the rest is routine: square it, scale it by the correct shape factor, and integrate. Master that translation from geometry to an integrand, and these problems become as predictable as they are satisfying.

Coming In Hot

Newly Published

For You

Don't Stop Here

Thank you for reading about Cross Section Perpendicular To Y Axis. We hope the information has been useful. Feel free to contact us if you have any questions. See you next time — don't forget to bookmark!
⌂ Back to Home